• Colormax Acid Catalysed Topcoat c/w Hardener - Satin 30%
  • WO2015 2
  • WO2015 3

Colormax Acid Catalysed Topcoat - Satin

Product Ref: WO2015S

5 people have viewed this product in the last 24 hours

Options

Add Colour Reference After Adding To Basket

5 Litre
£59.95 ex. VAT £71.94 inc. VATRRP: £0.00
View Favourites

In stockdelivered within 2-3 days

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Product Description

 free acid cat catalyst with Ultrimax acid catalysed purchases

Colormax Acid Catalysed Topcoat

A quick drying, high opacity pigmented range of acid catalyst colours providing outstanding resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals. Products of this type achieve their full resistance properties after 21 – 28 days curing, although careful use is possible before this period.

 

Chemically Cured So Use a Catalyst

Acid Catalsyed is chemcially cured rather than air dried so we recommend you also buy our Acid Catalyst with this product. When you purchase this product Ultrimax sends you a free acid catalyser product. You'll need a mix ratio of 10:1 so we'll send you a 0.5 litre of catalyst with every 5litre product you buy and 2.5litre of acid cat with every 25litre product you buy.

Mix Ratio = 10:1 (10 parts Paint/Lacquer to 1 Part Acid Catalyst)

Included with this order:

Order a 5ltr Topcoats, Primers, Lacquer. Receive a  0.5ltr Catalyst free.

Order a 25 litre Topcoats, Primers, Lacquer. Receive a  2.5ltr Catalyst free.

Technical Detail

FILM THICKNESS

Min. 100 - max. 150g/m2

 

SURFACE PREPARATION With sanded polyurethane or ureic basecoats.

 

RECOMMENDED TEMPERATURE In particularly hot or humid weather, or in tropical areas, add 1-3% anti-blushing thinner XS0007/00 to prevent blushing and promote flow. To speed up drying use DT1150/00 thinner instead of DS1105/00.

 

DRYING / OVERCOATING

100 g/m2 at 20°C):

Dust free 10’-15’

Touch dry 60’-70’

Stackable: 6 hours.

Forced ventilation (100 g/m2 ):

Recommended application system:

Flash-off: 20’

At 50°C.: 40’

Cooling: 20’

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat