Time Remaining

Aerosol - Ultrimax Gloss - Doosan Dark Grey
AEP100-DDG 2
AEP100-DDG 3
  • Aerosol - Ultrimax Gloss - Doosan Dark Grey
  • AEP100-DDG 2
  • AEP100-DDG 3

Colormax Aerosol - Ultrimax Gloss Fleet Aerosol

Product Ref: AEP100-DDG

2 people have viewed this product in the last 24 hours

Options
Options
400ml
£12.29 ex. VAT £14.75 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Ask a Question

We reply in 59 minutes or less within business hours.

Thank you for your interest in Ultrimax Coatings Ltd.

There was a problem with the form submission, please try again.

  • The CAPTCHA could not be validated. Please try again.

Product Description

Colormax Aerosol Ultrimax Gloss for Fleet

Colormax Aerosol Ultrimax Gloss is a highly-versatile topcoat metal paint that can be used on a variety of plant equipment, machinery and steel products. It's also suitable for sheet metalwork, railings and gates. Not only does it offer a high gloss finish, it also dries in record time – meaning you can tick one job off the list sooner.

It's available in a full choice of colours, each with excellent gloss retention and resistance to corrosion. This alkyd topcoat provides a tough, durable finish, and is great for projects that require a very quick drying time.

Features & Benefits:

  • Ideal for a glossy finish on sheet metal, tools, gates and railings, and general steel fabrications.
  • Surface dries in 30 minutes and to handle in 60-80 minutes (hard dry in 6-8 hours).

To find out more about Colormax Aerosol Ultrimax Gloss, contact the team at Ultrimax Coatings today.

Technical Detail

 

Application Methods

 
Colormax Aerosol Ultrimax Gloss can be applied in a number of ways, including using a brush or roller, an air-assisted airless spray, a conventional spray, or an airless spray (pressure 2000psi). It's important to note that the product can irritate eyes if it's not handled with care, and the vapours may cause drowsiness or dizziness.

Ensure all surfaces are free from grease, dirt, oil, rust and any other contaminates before application. The substrate should be a minimum of 3ºC above the dew point during application, although the ideal temperature is 15-20ºC. 

Before using, ensure you shake the canister well.

Storage Conditions

The Colormax Aerosol Ultrimax Gloss should be stored in a well-ventilated, cool area in accordance with national regulations. Keep it away from ignitions and heat when not in use.
It is safe to store unopened containers for up to 2 years.

Properties And Guidelines

 
The water, oil and solvent resistance of this product is rated GOOD, with a viscosity of 3.0 poise. The manufacturer of this product recommends it is kept out of the reach of children and protected from sunlight. Do not expose the spray to temperatures above 50 °C/122 °F.

It's important you do not breathe in the spray, so wear protective gear and clothing at all times. Do not burn or pierce the canister, even after use. Be sure to dispose of the container and any remaining contents in accordance with your local regulations.

Note: repeated exposure to Colormax Aerosol Ultrimax Gloss may cause skin cracking or dryness, but careful handling and the correct gear will ensure you don't experience any unnecessary irritation.

Videos

Blog Posts

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat