Everbuild Industrial High Viscosity Superglue - 50g
Ask a Question
We reply in 59 minutes or less within business hours.
Thank you for your interest in Ultrimax Coatings Ltd.
There was a problem with the form submission, please try again.
EVERBUILD INDUSTRIAL SUPERGLUE GP
is a medium viscosity flash setting industrial adhesive based on advanced cyanoacrylate technology.
Flash setting formulation, bonds to most non porous surfaces in seconds.
Fills gaps up to 0.1mm
Single component adhesive
100% solvent free
Economical in use Limitations
Ensure surfaces are degreased prior to bonding.
Ensure surfaces are close fitting. This adhesive will not bridge gaps.
Do not use in applications involving constant water immersion.
Do not use on bitumen or tar leaching products.
As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt.
The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extend