Time Remaining
Time Remaining
Product Ref: S-132675
7 people have viewed this product in the last 24 hours
In stock
No rating yet
Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.
0 loyalty points
A ready to use universal contact adhesive spray from Soudal, suitable for a wide range of substrates and surfaces. 15-20 minutes contact time for a permanent bond.
6x Contact Adhesive Sprays 300ml
Shake the canister thoroughly before application.
FOR A PERMANENT SPRAY ADHESIVE BOND: Spray the adhesive onto both substrates in a thin and regular layer. Leave to dry for at least 10 minutes, then join the parts and press firmly.
FOR A TEMPORARY SPRAY ADHESIVE BOND: Spray the adhesive onto one of the substrates only. Leave to dry for at least 20 minutes, join the parts and press together. The application can be corrected and if necessary removed.
Basis - Synthetic rubber
Curing system - Physical drying
Application method - Permant bond : apply glue on 2 parts Temporary/correctable bond : apply glue on 1 part
Temperature resistance** - -20 °C → 75 °C
Evaporation time - (= time before closing) 5-10 min. for a permanent bond 15-20 min. for a Temporary/correctable bond
Application temperature - 5 °C → 30 °C
Spray pattern - Mist Spray
Published: April 20, 2018
Published: June 29, 2020
Published: July 2, 2021
Published: November 9, 2021
Published: February 23, 2023
Published: April 12, 2023
Published: April 19, 2023
Published: July 27, 2023
Published: October 24, 2023
