• Sayerlack Polyurethane Clear Lacquer - Matt - Tu6110

Sayerlack Polyurethane Clear Lacquer Matt TU6110

Product Ref: WO3004/10

2 people have viewed this product in the last 24 hours

Options
6 Litre
£72.90 ex. VAT £87.48 inc. VATRRP: £0.00
View Favourites

 In stock 

Out of stock

Product Rating

No rating yet

Write your own review

Write a review

Thank you. Your review has been submitted and subject to moderation, will appear on this page shortly.

0 loyalty points

Product Description

Sayerlack Polyurethane Clear Lacquer TU61

Fast dry self sealing polyurethane lacquer with good resistance to domestic detergents and foodstuffs which can be stacked in 1 hour with the correct hardener. It can also form a finish in 1 coat with the appropriate denibbing stain.

Clear, two pack, polyurethane self-priming topcoat for kitchen doors. TU61 has been specially formulated for coating oak and chestnut kitchen doors on automated lines. It is also suitable for all types of manual spray applications, onto all timber types for almost any internal use.

It's main characteristics are to give the same result with a single coat of product as normally obtained with two applications of conventional polyurethane coating, provided the stain is denibbed. It also has one of the fastest re-coat times in the industry. In optimum conditions this can be sanded and re-coated in less than 10 minutes.

  • Good resistance to domestic detergent and foodstuffs
  • Extremely quick drying
  • Good build per coat
  • Excellent for vertical application
  • Result with a single coat equal to two costs of conventional polyurethane
  • Not subject to lift, even when over coating at short intervals

 

Hardener ** IMPORTANT NOTE

Requires 2K hardener. When spraying 2K paints you must use a hardener/catalyst with the paint to activate the first coat. Not using a hardener with this product may cause issues after use. You will receive an option to purchase hardener when you add this product to basket. You can choose to add the hardener or 'X' to add to basket without hardener. Ultrimax Coatings ltd takes no responsibility for issues arising with 2K paint used without the proper hardener.

 

Technical Detail

Gloss LevelMatt, Semi-Matt, Gloss, Smell-Gloss
HardenerTH775 / TH715
Mix50%
ThinnersDT1150
Volume Solids40%
Spreading Rate7m²/litre
Surface Dry15 minutes at 23°C
Application MethodSpray Gun
SurfacesKitchen Doors
Maintenance CycleUnlimited use- Stir well before use
Number of Coats1-3


Surface Preparation
TU61 must be applied to substrates that have been lightly sanded and are dust free. It can be very quickly force dried if required to enhance production throughout.

Typical Paint System
Two - three coats of TU61.

Essential Product Information.

Sayerlack Polyurethane Clear Lacquer - Matt - Tu6110

We strongly recommend that you also purchase the below with this product. Add to basket or cancel top right.

Compare Products (0)

This site uses cookies to provide you with a better on-site experience. By continuing your visit, you accept their use as set out in our Cookie & Privacy Policy. OK

Chat